Twitxy Saved

Likely7

Verified account This account is verified. Learn more

@likely2002

Joined January 2026
33 Following 636 Followers 174 Posts

Latest posts 5

Pinned post

Likely7 Verified account @likely2002
How to Properly Use Frame Generation for GTA 6 — From the Veyra Developer

Hey everyone! I'm the developer of Veyra.

Ever since it was confirmed that GTA 6 would run at only 30 FPS, my community has been growing incredibly fast.

Many players have discovered Veyra through different platforms and started using it. First of all, I'd like to thank everyone for your support and appreciation!

We currently have over 2,000 players in our community, and Veyra has also started gaining quite a bit of attention overseas.

So there's no need to worry too much about the software's usability or overall experience.

We've pushed capture card latency optimization almost to its absolute limits.

If you've previously tried using OBS or PotPlayer for capture and found the latency too high, I strongly recommend giving Veyra another try.

I think you'll notice a completely different experience.

How to Get the Smoothest Frame Generation Experience with 30 FPS Games

I'd like to share some tips on how to properly use frame generation with 30 FPS games while minimizing latency as much as possible.

First, even when playing a game running at 30 FPS, I still recommend setting your capture card to 60 FPS.

Why?

Because capturing at 60 FPS can actually provide lower display latency than capturing directly at 30 FPS.

The reason is illustrated in the image below.

As you can see, capturing at 60 FPS can reduce latency by more than half compared to capturing at 30 FPS.

However, when capturing a 30 FPS game at 60 FPS, half of the captured frames will inevitably be duplicates.

For example:

Original 30 FPS frames: ABCDEFG
Captured at 60 FPS: AABBCCDDEEFFGG

If you apply frame generation directly to these duplicated frames, the algorithm will try to interpolate between identical frames, resulting in poor frame generation quality.

Here's how to fix it:

Go to the Frame Generation section in Veyra and enable "Remove Duplicate Frames" or "60→30".

This converts the 60 FPS capture stream back into 30 unique frames.

As shown in the middle image above, you'll still maintain approximately the same low capture latency as 60 FPS capture.

At the same time, frame generation will no longer waste its work on duplicate frames, resulting in significantly better smoothness and visual quality.

🎮 Choosing the Right Frame Generation Model

For games running at 30 FPS, I strongly recommend using VFG instead of DLSS or XeSS frame generation.

The reason is simple: at such a low base frame rate, DLSS and XeSS struggle to avoid ghosting and jelly-like distortion.

With VFG in High Quality mode, you can achieve an image with almost no noticeable ghosting or warping artifacts.

If your GPU is powerful enough, the smoothness is genuinely incredible.

However, there's a catch: VFG High Quality is extremely GPU-intensive.

In my testing with an RTX 5070, generating a single frame at 4K using VFG High Quality takes approximately 20 ms.

This makes it mainly suitable for games running at 30 FPS.

But when it works, the result is unbelievably smooth. Seriously, smooth as silk.

What about Medium Quality?

VFG Medium Quality still produces significantly better results than DLSS or XeSS in low-FPS scenarios.

More importantly, its performance overhead is approximately 3–4 times lower than High Quality mode.

I highly recommend experimenting with both modes to find the best balance for your GPU.

🔍 Choosing the Right Super Resolution Model

I've noticed that many users still prefer DLSS SR.

However, because Veyra doesn't have access to the game's internal rendering pipeline, DLSS SR cannot deliver its full potential in our application.

The actual improvement is fairly limited.

Instead, I recommend using RTX Video Super Resolution.

Set the quality to Medium.

It provides a noticeable improvement in image quality without consuming too much GPU performance.

⚡ About Capture Card Latency

Let's talk about capture card latency.

Currently, most capture cards on the market use either 5 Gbps or 10 Gbps USB interfaces.

Across different brands, latency differences between capture cards using the same chipsets are generally quite small.

The main advantage of 10 Gbps capture cards is support for higher-bandwidth formats, including:

4K 60 FPS NV12

1440p 60 FPS HDR

4K 30 FPS HDR

Here are some approximate latency measurements:
Capture FormatLatency1440p 60 FPS NV1210–20 ms4K 60 FPS NV1230–40 ms4K 30 FPS P010 (HDR)80–100 ms
So, if you're extremely sensitive to latency, you can actually capture at 1440p 60 FPS NV12 and then use super resolution to upscale the image.

This gives you a much lower-latency gaming experience.
Although, to be fair, most people aren't nearly as sensitive to latency as they think they are.
Not everyone is an esports professional, even if they think they are. 😂
If you absolutely want native 4K resolution and native HDR, there's not much you can do.
Just get a PCIe capture card.
But if you're happy with RTX HDR, you can save yourself some money.
Simply enable RTX HDR inside Veyra.
The results actually look pretty damn good.
🛒 Recommended Capture Cards
5 Gbps Capture Cards
Supported formats:

1440p 60 FPS NV12

4K 30 FPS NV12

These are my first choice for 1440p users who don't need HDR. They're also suitable for 4K users who can tolerate slightly higher latency.

Recommended models:

MICHENSEN T800 / T900

KUHAIMI 27P / 26P

ACASIS 007 Pro / 009 Pro

AVerMedia GC553 Pro / GC551G2

Elgato HD60 X

10 Gbps Capture Cards

Supported formats:

1440p 60 FPS HDR

4K 30 FPS HDR
4K 60 FPS NV12
Recommended models:

MICHENSEN T911

KUHAIMI G50

AVerMedia GC553G2
Elgato 4K X
PCIe Capture Cards
Supported format:
4K 60 FPS HDR

Recommended models:

AVerMedia GC573

Elgato 4K Pro
For capture cards with the same specifications, feel free to choose whichever brand you prefer.
Based on my testing, latency differences between comparable models are generally within 5 ms.
There's no need to spend a fortune just for a different brand name.

That's all for now. Enjoy your games, everyone! 🎮
45 replies 28 reposts 590 likes 54K views View on X
Likely7 Verified account @likely2002
A lot of people have misunderstood what Veyra is actually capable of. They think you need a $500+ capture card to enjoy smooth gameplay. But based on our team's testing, that's simply not true.

In China, tons of players are using capture cards that cost just $25–$70, and they're still able to enjoy GTA 6 at 60 FPS with low latency through Veyra.

Of course, those prices are based on the Chinese market. In the US, you might be looking at around $100 instead. And honestly, for the greatest game of all time, GTA 6, I think spending $100 is absolutely worth it.

But before buying a capture card, make sure you check its supported capture formats.

Look for these formats:
1440p60 NV12
4K30 NV12
4K60 MJPEG

I don't personally recommend using MJPEG, but if a capture card supports 4K60 MJPEG, it means it's using the latest 5Gbps capture chipset.

The brand really doesn't matter. As long as the card supports the formats I mentioned above, it's using the exact same chipset and hardware solution as the Elgato HD60 X.

That means the latency difference between them is less than 5ms.

In other words, you can get the same performance as an Elgato HD60 X for a fraction of the price.

And here's the funny part: those so-called "frame generation capture cards" are basically a scam. They're all using the same chips under the hood. The only thing that's different is the fancy plastic shell you're paying extra for. LOL.

Once you've got your capture card, check out my pinned post and follow the recommended settings to get the best experience.

Trust me, you'll come back and thank me later.

This is absolutely the best way to experience GTA 6. 60 FPS GTA 6, here we come!
35 replies 8 reposts 228 likes 22K views View on X
Likely7 Verified account @likely2002
现在一打开X,就全部都是Veyra,谁能想到两个月前它还是一个简陋的不能再简陋的程序?
Star Wars HQ @theStarWarsHQ 21h
I finally managed to get #GTA6 running at 60 FPS with DLSS 5 Neural Rendering X2 thanks to the Veyra program. I never imagined this would be possible at launch!!! 🤯🤯🤯

Setup: PS5 Pro, NVIDIA RTX 4080, Veyra Frame generation x2 with Nueral Rendering x2
View quoted post on X
0 replies 0 reposts 15 likes 3.1K views View on X
Likely7 Verified account @likely2002
🚀 Veyra 2.2.0 is OUT!

This is a BIG update!

✨ What's new:
• Windows installer & built-in updates
• Real-time AI subtitle translation
• OBS Virtual Camera support
• Sharper fullscreen scaling
• Smarter frame generation & HUD locking
• Improved PS5 streaming, capture & HDR
• Tons of bug fixes and stability improvements!
30 FPS → 120 FPS. The GTA 6 dream continues. 🔥
Free & open-source.
93 replies 58 reposts 1.7K likes 244K views View on X